|
|
|
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense.
This equipment has been tested and found to conform to the directives and standards for a Class A Information Technology Equipment TYPE and for the Commercial Light Industrial equipment class.
The VIP-602 USB-PS/2 "MegaSwitch"™ Keyboard, Mouse and Video Switches are available as a full function, Integrated Switch with keyboard control selection, switching keyboard, mouse, and video. Models are also available for switching Audio, Serial Touch Screen, and Dual Video. The "MegaSwitch" allows one Workstation comprised of a PS/2 Keyboard, a PS/2 Mouse, and VGA Monitor(s) to control and work with one or two PS/2 or USB PC's. All models come with the VIP-210 power supply.
Note: The "MegaSwitch does not come with PS/2, USB, Audio, Serial, or VGA extension cables. They may be ordered from Vetra separately (see Accessories ).
There are three main steps to connect the Switch:
1. Connect PC's to Switch unit:
PS/2 PC's
a) PS/2 Keyboard Port Connect the keyboard inputs of the PC's to the Switch using 6 pin PS/2 male/male extension cables. Connect PC#1's keyboard port to the backpanel connector of the Switch marked "TO PC1 K". Connect PC#2's keyboard port to the backpanel connector of the Switch marked "TO PC2 K".
b) PS/2 Mouse Port Connect the mouse inputs of the PC's to the Switch using 6 pin PS/2 male/male extension cables. Connect PC#1's mouse port to the backpanel connector of the Switch marked "TO PC1 M". Connect PC#2's mouse port to the backpanel connector of the Switch marked "TO PC2 M".
USB PC's
Connect the USB ports
of the PC's to the Switch using a Mini USB 4-pin type A male to
type B male cable. Connect PC#1's USB port to the backpanel connector
of the Switch marked "TO PC1 USB PORT". Connect PC#2's
USB port to the backpanel connector of the Switch marked "TO
PC2 USB PORT".
Video
Connect the Video outputs of the PC's to the Switch using 15 pin
HDD15 male/female extension cables. Connect PC#1's video output
to the backpanel connector of the Switch marked "PC1 MON".
Connect PC#2's video output to the backpanel connector of the
Switch marked "PC2 MON".
Connect PC#1's Monitor A video output to the backpanel connector of the Switch marked "PC1 MON A" and connect PC#1's Monitor B video output to the backpanel connector of the Switch marked "PC1 MON B" and PC#1's Monitor C video output to the backpanel connector marked "PC1 MON C". Repeat this step for PC#2.
Audio (Audio models only)
Connect the Microphone inputs of the PC's to the Switch using
a stereo cable male/male with 3.5 mm plugs at connectors marked
"TO PC 1 MIC " and "TO PC 2 MIC". Connect
the speaker outputs of the PC's to the Switch also using a stereo
cable male/male with 3.5 mm plugs at connectors marked "TO
PC 1 SPKR" and "TO PC 2 SPKR".
2. Connect a Workstation to the Switch:
a) PS/2 Keyboard Connect the keyboard to the 6-pin DIN connector on the front panel of the Switch marked "PS/2 KBD IN". An adapter 6-pin Male to 5-pin Female is provided for use with AT style keyboards.
b) PS/2 Mouse Connect the mouse to the 6-pin DIN connector on the front panel of the Switch marked "PS/2 MSE IN".
c) VGA Monitor(s) Connect the VGA monitor to the 15-pin HDD connector on the backpanel of the Switch marked "MON IN".
Connect the VGA Monitor A to the 15-pin HDD connector on the back panel of the Swicth marked "MON A IN". Repeat for Monitors B and C.
d) Serial Touch Screen models only Connect the Touch Screen to the 9-pin DB9 connector on the backpanel of the Switch marked "TOUCH SCREEN IN".
e) Audio models only Connect the microphone to the connector
on the Switch marked "AUDIO INPUTS MIC IN" and connect
to the speakers to the connector marked "AUDIO INPUTS SPKR
IN".
3. Connect the Power Supply to the MegaSwitch
The MegaSwitch is powered by an external wall plug-in supply the VIP-210 (+5Vdc 1A reg. 100 - 120 Vac 50 - 60 HZ). First plug the power output plug of this external supply into the mating jack on the backpanel of the MegaSwitch marked "+5VDC IN", and only thhe plug the supply into a suitable AC power source. Since the MegaSwitch has no separate power on/off switch, it is recommended that the power supply be connected to an AC power source that has a power on/off switch.
OPERATION
1. Power Up Sequence:
There is no separate power control for the switch. The switch derives its power directly from the external power supply supplied with the MegaSwitch. The MegaSwitch MUST be powered up first before any of the PC's are powered up to ensure proper communications from the MegaSwitch to the PC's. Any other power up sequence will not guarntee the integrity of the communications between the PC's and the MegaSwitch.
2. PC Selection:
a) Keyboard "Hot Key" Selection (available on all models): To select an active PC, first hold down the Scroll Lock Key, then pressing and releasing the top row keyboard keys 1 or 2. The number keys must be released before the Scroll Lock key. Switching takes place on the release of the Scroll Lock Key, which also rearms the keyboard selection mechanism. When selection of PC#1 or PC#2 is completed, observe on the front panel of the switch that the appropriate green "SEL" indicator is on.
b) Front Panel Selection:
SPECIFICATIONS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Environmental Operating
Temp: 5
to 104 deg. F (-15 - 40 deg. C)
Storage
Temp: -4
to 122 deg. F (-20 - 50 deg. C)
Supported
Hardware Computer: IBM
PC/AT, PS/2, USB and 100% compatibles
Video
Monitors: VGA,
SVGA
Maximum
Resolution: up to 1600 x 1200 to 75 Hz
Peripherals: AT
and PS/2 keyboards, PS/2 mouse, IntelliMouse (PS/2 only)
MegaSwitch is a trademark of Vetra Systems Corporation Copyright © 1995 - 2008 by Vetra Systems Corporation All Rights Reserved
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
275 Marcus Blvd. Ste-J Hauppauge, NY 11788-2022 USA Toll Free 1.800.537.9296 Tel: 631.434.3185 Fax: 631.434.3516 e-mail: sales@vetra.com |