PS/2 KVM DVI Switch with Serial Touchscreen Support
|
Front of VIP-802-KMD-TS
|
|
Rear View of VIP-802-KMD-TS and VIP-802-KMD-TS-DE |
Front view of VIP-802-KMD-TS-DE |
|
For VGA PS/2 touch screen switches click here.
Description:
The VIP-802-KMD-TS series "MegaTouch"™ 2 Port PS/2 Touch Screen KVM Switch allows one PS/2 keyboard, PS/2 mouse and one serial touch screen DVI video monitor to control two PS/2 PCs or Servers. It is the ideal solution for serial touch screen DVI monitor applications requiring access to two computers, without the clutter and expense of additional keyboards, mice and touch screen monitors. The VIP-802-KMD-TS series supports all popular PS/2 keyboards, PS/2 mice, and serial touch screen monitors, including those from 3M, MicroTouch, ELO.
Devices may be "hot-plugged" at any time, and the connected PCs may be powered up and down in any order. The unique architecture of the VIP-802-KMD-TS series 2 Port serial Touch Screen KVM Switch ensures error-free boot up and device driver loading for each connected PC, and allows the MegaTouch to operate transparently with all USB compatible PCs, including iMAC's, PC operating systems, and applications.
The VIP-802-KMD-TS series 2 Port DVI Serial Touch Screen KVM Switch comes in a variety of standard configurations, is compact in design, easy to install and operate, and is ideally suited for desktop use. For applications requiring rack mounting, an optional 2U height rack mount tray is available (see Accessories). The VIP-802-KMD-TS series is also available as a Dual-Head serial Touch Screen Switch and as a serial Touch Screen Monitor Switch (touch screen monitors only, both VGA and DVI, no keyboard or mouse) for applications where only a touch screen is needed.
The VIP-802-KMD-TS series 2 Port serial DVI Touch Screen KVM Switch was designed and manufactured in the USA for use around the world for enterprise mission-critical applications and is backed by a Limited 3-year Warranty.
For more information on this product or our complete line of KVM solutions, please contact us at sales@vetra.com
Operation:
On all VIP-802-KMD-TS series "MegaTouch"™ serial DVI Touch Screen KVM Switch models the active PC is selected via a keyboard "hot-key" sequence ( [scroll lock] + [1] for PC1, or [scroll lock] + [2] for PC2 ) or by a push button(s) located on the front panel of the serial DVI Touch Screen KVM Switch. Direct Entry models (as indicated by -DE in the model number) have an individual push button for each PC channel. Non-DE models have a single push button (NEXT PC) which toggles between the two connected PCs.
On all models, the selected PC channel is indicated by an illuminated LED on the front. Additional LED's indicate which PCs are powered. Upon selection, the intelligence in the MegaTouch correctly sets the keyboard's status indicators, CAPS, SCROLL, and NUM Lock, as these settings may be different for each PC. The devices, including the USB DVI touch screen, may be disconnected and re-connected (hot-plugged), or exchanged at any time without having to power down the connected PC's.
|
Features:
-
Designed and manufactured in
the USA for use around the world
- Backed by a Limited 3 Year Warranty
-
Supports all popular serial DVI Touch Monitors, including MicroTouch, 3M and ELO.
- Models available to
support dual DVI
video,
and up to four DVI monitors by special order
- The MegaTouch™ is completely transparent
to all PC's, operating systems, and programs
- Each PC boots error free, and
PC's can be powered up or down in any sequence
- Keyboard LED's and parameters
are correctly set when switched from PC to PC
- PC selection via the industry's
easiest and fastest
hot key selection sequence,
no scrolling through complicated menus
- Uses inexpensive standard cables,
eliminating the need for costly multi-port cables
- A 2U height rack mount tray
is available for rack mount installation
|
Connections:
Standard male-male 6 pin mini-DIN
extension cables are used to connect the MegaTouch to the keyboard
and mouse ports of the PC's,
and standard DVI-D Male-Male video cables are used to connect
to the DVI video ports of PCs. Standard
DB9 Male-female cables are used to connect to the serial ports
(for touch screen data) of the PC's. Using standard cables eliminates the
need to replace an entire multi-port cable if one connection
is damaged or fails, thereby reducing the overall cost of maintenance.
You may use your cables, or ours (see Accessories
). The captive cables that are part of the keyboard, mouse, and serial touch
monitor are used to connect these devices to the MegaTouch.
Specifications:
Dimensions for the VIP-802-KMD-TS and VIP-802-KMD-TS-DE Touch Screen KVM Switch are 3.38 in H x 6.06 in W x 6.32 in D (8.59
cm x 15.39 cm x 16.05 cm). The housings are molded
of black GE Cycolac-T, a high impact ABS material, and is internally
shielded with an acrylic base nickel coating for RFI attenuation.
Front and rear panels are fabricated from .062 in thick aluminium
and finished with low gloss paint. All VIP-802-TS Touch Screen
KVM switch models are powered from the connected PC's keyboard
and mouse ports, so no external power supply is required. FCC
and CE marked. Shipping weight is less than 3 lbs per unit. |
|
Environmental |
Operating Temp:
Storage Temp: |
5 to 104 deg. F
(-15 - 40 deg. C)
-4 to 122 deg. F
(-20 - 50 deg. C) |
|
Supported
Hardware |
Computer:
DVI Touch Screen Monitors:
Maximum Resolution:
Peripherals: |
PS/2
DVI-D
up to 1920 x 1200
PS/2 keyboards, PS/2 mice |
|
MegaTouch is a trademark of
Vetra Systems Corporation Copyright © 1995-2011 by Vetra
Systems Corporation All Rights Reserved |
For user instructions in PDF format.
 For a copy of Adobe's Acrobat® Reader".
|
All prices
are subject to change without notice.
For International
Representatives click here.
|
|
Vetra Systems welcomes Reseller inquiries
|
|
