Vetra Systems Corporation  The Industry's Broadest Line of KVM Products

User Instructions for
VIP-327-SP "MouseFlipper"™ Mouse Format Converter,
Serial to PS/2


FEDERAL COMMUNICATIONS COMMISSION

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense.

CE

This equipment has been tested and found to conform to the directives and standards for a Class A Information Technology Equipment type and for the Commercial Light Industrial equipment class.

INTRODUCTION

The VIP-327-SP "MouseFlipper"™ Mouse Format Converters allow a serial mouse to be connected to the PS/2 mouse port of a PC.

INSTALLATION

Installation of the VIP-327-SP is exceedingly simple:

All connections should be made with the PC power off!!

1. Connect the PC: Use the male/male 6 pin DIN cable supplied with the unit to connect the Converter at the connector marked "TO PS/2 MSE PORT" to the PC's PS/2 mouse port connector.

2. Connect the Mouse: Use the serial mouse's cable / plug to connect the mouse to the DB-9 cable connector on the Converter marked "SERIAL MOUSE IN".

OPERATION

The VIP-327-SP Converter and serial mouse are powered by the the connected PC, so no external power source is required. On PC power-up, the Converter will insure that the serial mouse receives the correct boot-up commands from the PC. The connected serial mouse should be compatible with the IBM Serial Mouse Protocol. Click the link for detailed information on protocol compatibility.

Copyright© 2000 - 2005 by Vetra Systems Corporation All Rights Reserved

 [ Home ]

  [ Products ]

  [ About Us ]

 [ Site Map ]

 [ Contact Us ]

 [ Order Info ]

 [ What's New ]

 [ KVM Switches ]

 [ Dual-Head KVM Switches ]

  [ Touch Screen Products ]

 [ Video Products ] 

 [ KVM Splitters ]

 [ PC Keyboard Encoders ]

 [ Keyboard & Mouse Terminators ]

 [ KVM Extenders ]

 [ Safe Computing Products ]

 [ Foot-operated Devices ]

 [ Protocol Converters ]

 [ Accessories ]

 Vetra Systems Corporation logo

 VETRA Systems Corporation
275 Marcus Blvd. Ste-J Hauppauge, NY 11788-2022 USA
Toll Free 1-800-537-9296
Tel: 631-434-3185 Fax: 631-434-3516 e-mail: sales@vetra.com