|
|
|
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This equipment has been tested and found to conform to the directives and standards for a Class A Information Technology Equipment type and for the Commercial Light Industrial equipment class.
The USB-844 "MegaCast"™ USB Keyboard Broadcaster allows one USB non hub keyboard to control up to four PC's. The output of the keyboard is routed simultaneously to all connected and powered on PC's. The keyboard must be connected directly to the USB-844 and not have any built-in, or on-board, hub. All models of the USB-844 come with the VIP-210 power supply.
Note: The "MegaCast" does not come with USB extension cables. They may be ordered from Vetra separately.
Before connecting
PC's to the Broadcaster, make sure the Broadcaster is powered
by its Power Supply! The PC's may be powered or not when you connect
them to the Broadcaster. Keyboard, mouse and video monitor may
be connected to the Broadcaster at any time. Do not power down
the Broadcaster while any PC is connected to the Broadcaster!
There are two
main steps to connect the Broadcaster:
1. Connect PC's to Broadcaster unit:
Connect any available USB input on the PC's to the Broadcaster using USB A-B cables. Connect PC #1's USB port to the backpanel connector of the Broadcaster marked "PC1". Connect PC's #2, #3, and #4 USB ports to the appropriate backpanel connectors of the Broadcaster marked "PC2", "PC3" and "PC4". The Broadcaster will operate with less than all four PC's connected.
2. Connect
Keyboard to Broadcaster unit:
The USB keyboard (non hub version) is connected to the Broadcaster
at the backpanel marked "KBD IN".
Before making
any connections to the PC's, connect the external power supply
to the Power Jack, marked "+5VDC IN", on the back panel
of the Broadcaster. The Broadcaster should be powered up first
before any of the PC's are powered up.
|
|
|
|
|
|
|
|
|
|
|
|
Environmental
Operating
Temp: 5
to 104 deg. F (-15 - 40 deg. C)
Storage
Temp: -4
to 122 deg. F (-20 - 50 deg. C)
Supported Hardware
Computer:
with
USB port(s)
Peripherals:
USB-non
hub compliant keyboards
MegaCast is a trademark of Vetra Systems Corporation Copyright © 1995 - 2008 by Vetra Systems Corporation All Rights Reserved
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
275 Marcus Blvd. Ste-J Hauppauge, NY 11788-2022 USA Toll Free 1-800-537-9296 Tel: 631-434-3185 Fax: 631-434-3516 e-mail: sales@vetra.com |